Curtiss-Wright Defense Solutions

KAD/ENC/005 1 channel IRIG-106 PCM encoder

Downloads
SPECIFICATIONS
RELATED PRODUCTS
SUPPORT
REQUEST A QUOTE

Product Downloads

KAD/ENC/005 Product Sheet

Featured Downloads

Features

100% IRIG-106 compliant
Fully software programmable
Up to 14 PCM codes at up to 16 Mbps
2 to 32K words per major frame
1 to 8K words per minor frame
4 to 64 bits per word (programmable word by word)
Odd, even or no parity (programmable word by word)
Supports any sync. word and sub-frame strategy

Applications

Encode data in IRIG-106 Ch.4 PCM stream

DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...

KAD/BCU/140 Ethernet Backplane Controller

The KAD/BCU/140 is a full-duplex, Ethernet, Acra KAM-500 backplane controller packet programmer and an IPv4 data packets transmitter (via a 100BaseTX link interface). The Acra KAM-500 backplane...

KAD/ENC/106 IRIG-106 PCM encoder (PMF output)

KAD/ENC/106 4 Ch. IRIG-106 PCM encoder

The KAD/ENC/106 is used to encode data from any KAM-500 module in an IRIG-106 Ch.4 PCM stream. Multiple KAD/ENC/106 modules can be included in a KAM-500 system and parameters can be sent to some or...

KAD/ENC/111 CCSDS Encoder

The KAD/ENC/111 is a CCSDS encoder with Ethernet interface and a 64 MB internal memory buffer. It is used to wrap UDP packets received over Ethernet into CCSDS frames of fixed length of 1,279...

CONTACT SALES/SUPPORT

The KAD/ENC/005 is used to encode data from any KAM-500 module in an IRIG-106 Ch.4 PCM stream. Frame configuration is versatile and fully IRIG-106 compliant. Parameters to be transmitted are stored in predefined locations in RAM. Each parameter has a word definition that includes the location in RAM, bits per word, MSB sent first/last and parity. This definition controls the RAM reader and the parallel-to-serial converter.

The KAD/ENC/005 has differential ended (D/E RS-422) outputs for data and clock along with buffered TTL outputs for NRZ-L and the four bit/word/minor-frame/major-frame pulses. Multiple KAD/ENC/005 modules can be included in a KAM-500 system and parameters can be sent to some or all of the encoders. For example, a system can have two encoders using different codes, data rates, word lengths and frame lengths. The only restriction is that an integral number of major frames be transmitted per acquisition cycle.

Download Product Sheet register now Request Quote