Curtiss-Wright Defense Solutions

KAD/EBM/102 1 channel Gigabit Ethernet Bus Monitor

Downloads
SPECIFICATIONS
RELATED PRODUCTS
SUPPORT
REQUEST A QUOTE

Product Downloads

KAD/EBM/102 GE Bus Monitor Parser Product Sheet

Featured Downloads

Features

Monitors a single 1000BaseT, IEEE 802.3 standard compatible, Gigabit Ethernet interface over copper cabling
Coherently parses and classifies IPv4 packets up to 1,500 bytes and tags for up to 254 different flows and one catchall flow
Supports flow identification on selected frame fields (8 × 16-bit fields) such as Ethernet MAC addresses, IP addresses, Layer 3 (UDP/TCP) fields, and Layer 4 application layer fields such as stream identifiers

Applications

Monitoring, recording, diagnosis and troubleshooting of Ethernet network traffic
Detection of system failures and performance problems

DAS Studio 3 Setup software for DAUs, network switches, recorders and ground stations

Setting up data acquisition systems can take a lot of time and effort, particularly as many systems today are growing larger and larger. Managing thousands of channels of data over dozens of data...

KAD/ABM/103 ARINC-429 bus monitor parser/packetizer

The KAD/ABM/103 is an ARINC-429 bus monitor which combines the capabilities of a coherent message parser with the flexibility of an iNET-X packetizer and an error-detection function, on a single...

KAD/EBM/103 Parser for ARINC-429

The KAD/EBM/103 is designed to accept 100BASE-TX Ethernet traffic, then parse it and distribute it to other Acra KAM-500 modules. The KAD/EBM/103 parses A664P7 traffic on the Rockwell Collins Pro...

KAD/ENC/106 IRIG-106 PCM encoder (PMF output)

KAD/ENC/106 4 Ch. IRIG-106 PCM encoder

The KAD/ENC/106 is used to encode data from any KAM-500 module in an IRIG-106 Ch.4 PCM stream. Multiple KAD/ENC/106 modules can be included in a KAM-500 system and parameters can be sent to some or...

KAD/MBM/102 MIL-STD-1553 bus monitor parser/packetizer - 4 channels dual redundant

KAD/MBM/102 4 channel Dual redundant bus monitor

The KAD/MBM/102 is a MIL-STD-1553 bus monitor, which can monitor up to four dual redundant busses. It combines the capabilities of a coherent message parser, with the flexibility of an iNET-X...

CONTACT SALES/SUPPORT

1 channel Gigabit Ethernet bus monitor parser

The KAD/EBM/102 can operate on 10BASE-T, 100BASE-TX and Gigabit Ethernet (1000BASE-T) links and parse Ethernet frames. This allows the data within the parsed Ethernet frames to be distributed to other KAM-500 modules. The KAD/EBM/102 can classify traffic using 8 x 16-bit frame fields such as MAC addresses, IP addresses, IP length, protocol type (UDP/TCP), UDP or TCP port numbers. Up to 254 unique flows can be identified, where a flow represents a stream of Ethernet frames from a specific source to a specific destination.

Flows are tagged with time stamps and packet count. The identification is based on the classification parameters with optional masking. All other traffic, excluding network management traffic such as ARP and ICMP-PING, is optionally discarded or else monitored via the catchall parser slot-ID 254. The KAD/EBM/102 replies to ARP requests and ICMP-PING requests. The KAD/EBM/102 can optionally operate in a promiscuous mode, which allows it to observe all traffic on the link, not only packets that are addressed to it.

Download Product Sheet register now Request Quote