VPX6-187 6U VPX SBC with NXP Power Architecture P4040/4080 Processor

  • Downloads

Key Features

  • NXP QorIQ P4040/4080 Communications Processor with eight Power Architecture processor cores, high-performance datapath acceleration logic, network and peripheral bus interfaces required for mil/aerospace applications
  • 8 E500MC cores at up to 1.5 GHz
  • Memory:
    • Up to 8 GB DDR3 SDRAM with ECC controlled by dual 64-bit controllers
    • 8512 MB NOR flash
    • 8 GB onboard NAND flash
    • 512 KB FRAM
  • I/O:
    • (3) Gigabit Ethernet interfaces (optional dual 1000BASE-X)
    • (4) asynchronous EIA-232 serial ports and up to (4) sync/async EIA-232/422/485 serial channels
    • (2) SATA, (2) USB 2.0, (14) DIO, (16)DIFFIO, (2) 1553
  • Fabric Interconnect Ports
    • One PMC/XMC sites supporting parallel PCI or PCI Express, P64S + X12D
    • One x8 PCIe XMC site with full complement of XMC I/O, X8D+12D+38S
    • One 64-bit PMCs on independent PCI buses
  • Software
    • Curtiss-Wright U-Boot firmware providing a comprehensive suite of system debug, exerciser, and updated functions, BIT, and non-volatile memory sanitization functions
    • Wind River VxWorks 6.x SMP
    • Wind River Linux 4.x
    • INTEGRITY available from Green Hills Software
    • LynxOS-178B and LynxOS 7 available from Lynx Software Technologies
    • MILS 2.1 available from Wind River
  • Additional Features
    • Designed for military harsh-environment applications, both air- and conduction-cooled
    • Second generation VPX card in Curtiss-Wright's popular 18x series of VPX single board computers
    • VPX/VPX-REDI formats backwards compatible with Curtiss-Wright's VPX6-185



  • SWaP-C consolidation 
  • Mission computer applications 
  • ISR applications 
VPX6-185 6U VPX SBC with Dual NXP Power Architecture 8640 Processors

VPX6-185 6U VPX SBC with Dual NXP Power Architecture 8640 Processors

The VPX6-185 NXP Single Board Computer (SBC) provides functionality to the Curtiss-Wright VPX family that includes quad-processor DSP, FPGA accelerator and XMC/PMC carrier modules. The VPX6-185 6U...

XMC-715 Graphics Controller XMC

XMC-715 Graphics Controller XMC

The XMC-715 is an AMD E4690-based high performance graphics controller XMC designed for rugged deployed military and aerospace graphics sub-systems where high-performance, low power, high...

P/XMC-651 Rugged Ethernet Mezzanine Switch

P/XMC-651 Rugged Ethernet Mezzanine Switch

The XMC/PMC-651 is a 12-port Gigabit Ethernet switch packaged in the industry-standard XMC form factor. It is designed to support "in-chassis" networks with managed Layer-2 switching capabilities....

XMC-603 MIL-STD-1553 XMC

XMC-603 MIL-STD-1553 XMC

The XMC-603 PMC module allows customers to readily incorporate MIL-STD-1553 into military and aerospace embedded computing systems. As one of several products in our comprehensive range of rugged...


XF07-523 FPGA Digital IO XMC

The XF07-523 is a rugged Kintex-7 FPGA based XMC with digital IO. The combination of direct high-speed I/O ports and FPGA processing makes the XF07-523 ideal for demanding applications including...


We’d like to keep in touch and send you updates on our products, news and developments – please tick below to make sure you don’t miss out. You can unsubscribe at any time by clicking on the unsubscribe link at the bottom of the emails. Your personal information will not be shared with any person or organization outside of Curtiss-Wright. Review our privacy policy.

“This product has reached end of life. For a similar NXP Power Architecture-based 6U module, we recommend looking at the VPX6-197. Or, browse our full selection of processor cards.

The VPX6-187 VPX Single Board Computer (SBC) is based on the NXP QorIQ P4040/4080 SOC multi-core processor. Available in versions with 4 or 8 cores running up to 1.5 GHz, and up to 8 GB of high-bandwidth DDR3 SRAM, the VPX6-187 SBC provides high-performance processing and a long list of features and I/O interfaces to satisfy the most demanding requirements of embedded computing.

Available in a full range of environmental build grades, the VPX6-187 is targeted at the challenging data and digital signal-processing needs of tactical aircraft, armored vehicles and harsh environment naval systems. For retrofit and technology insertion applications, the VPX6-187 offers a superset of the I/O features of the previous generation Curtiss-Wright VPX6-185 Power Architecture SBC. The VPX6-187 supports the life-cycle model of successive technology insertions throughout a platform's lifetime.

The VPX6-187 OpenVPX Single Board Computer is supported by a wealth of software including Curtiss-Wright's standard U-Boot, Wind River VxWorks 6.8/6.9/653/MILS, Wind River Linux Board Support Package (BSP) and Driver Suites SMP operating modes. An INTEGRITY BSP is available from Green Hills Software. LynxOS-178 and LynxOS 7 support is available from Lynx Software Technologies

Product Finder

Connect With Curtiss-Wright Connect With Curtiss-Wright Connect With Curtiss-Wright


Contact our sales team today to learn more about our products and services.





Our support team can help answer your questions - contact us today.